background image

ZN-7100-DE500-G 

802.11n Dual-Band 

Outdoor Access Point 

Quick Setup Guide 

This Quick Setup Guide provides step-by-step 
instructions on how to set up your ZN-7100-
DE500-G Outdoor Access Point on your 
network. This guide is intended for use by 
those responsible for installing and setting 
up network equipment.   Consequently, it 
assumes a basic working knowledge of local 
area networking, 
wireless networking, and wireless devices. 

PACKAGE CONTENTS

 

HARDWARE OVERVIEW 

Top View 

No.          Item 

1              2.4GHz RF Antenna Connector 

2              2.4GHz RF Antenna Connector 

3              5GHz RF Antenna Connector 

4              5GHz RF Antenna Connector 

Bottom View 

No.                                 Item 

1                                     GND 

2                                     SFP 

3                                     Ethernet 

4                                     Reset Button 

5                                     Ventilation Hole 

No 

LED 

State 

Description 

PWR 

On 
(Green) 

Power is supplied to 
the device through 
the Ethernet port 

Off 

Power off 

LED Indicators on the PoE Injector 

Summary of Contents for ZN-7100-DE500-G

Page 1: ...onsequently it assumes a basic working knowledge of local area networking wireless networking and wireless devices PACKAGE CONTENTS HARDWARE OVERVIEW Top View No Item 1 2 4GHz RF Antenna Connector 2 2 4GHz RF Antenna Connector 3 5GHz RF Antenna Connector 4 5GHz RF Antenna Connector Bottom View No Item 1 GND 2 SFP 3 Ethernet 4 Reset Button 5 Ventilation Hole No LED State Description 1 PWR On Green ...

Page 2: ...owser window 2 In the browser type https 192 168 1 1 and press Enter to connect to the AP 3 When a security alert dialog box appears click OK Yes to proceed 4 When the login page appears enter the following Username admin Password password 5 Click Login SETUP REQUIREMENTS Before installing your IAP 105 access point be sure that you have the following 1 Insert one end of an Ethernet cable to the P ...

Page 3: ...E 1 Secure the mounting clip to the back of the wireless AP with four screws 2 Slide the securing rings through the mountingbracket Adjust the straps to make sure that the rings are securely fastened to the pole 3 Slide the mounting clip into the slot on the mounting bracket 4 Insert the bolt into the hole on the mountingclip the mounting bracket and secure the end with the lock nut Note Makesure ...

Page 4: ...eless network you vepreviously configured 2 If you can connect open a browser and link to any public Web site Copyright 2013 Z Com Inc All rights reserved ZDC is trademark of Z Com Inc All other company and product names mentioned in the documentation are held to be trademarked and registered by the primaryholders If you are using AP Controller to manage the AP please refer to the AP Controller us...

Reviews: