Solo documento principale.
18/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
3.4.
Electrical connections
This chapter describes the electrical connections of the system. Carefully read this section before
connecting the cables. All the local, regional and national regulations must be complied with during
installation, repair and maintenance of the product.
Before making any electrical connections, make sure there is no AC
current. Zucchetti Centro Sistemi Spa assumes no responsibility for
any liabilities arising from the use of this product. Installation must
be carried out by a qualified professional with the skills and
knowledge to build, install and operate electrical components, and
who has been trained on how to identify and prevent potential risks.
Attention
Installation and maintenance must be performed by professional
technicians or electricians.
Attention
3.5.
Connecting AC power cables
Connect the Connext system to the power supply network or mains using the AC power cables.
Context
All AC power cables used for the inverter must be three-pole outdoor cables. For easier installation,
use flexible cables. The specific cross-section recommended for connections is at least 1mm
2
.
For safety reasons, make sure to use suitably sized cables, otherwise
the current may cause overheating or overloading, leading to fires.
Note
