Zcom ZAC Series, User Manual

Page: 10 / 109

P. 10
Chapter 1 Introduction
Introduction
The ZAC Series Access Point is a multi-mode 2x2 Access Point embedded with a software-based
virtual access controller (VAC) for centrally managing managed APs that eliminates the need for a
separate hardware controller to manage the WLAN. ZN-7200-2AEI-L operates at 5GHz band. Ideally
for SMB or hotspot network, this breakthrough innovation provides superior Wi-Fi network solutions at
significantly lower cost and easier management.
While operating as access point, the ZAC Wireless CPE also provides centralized management and
monitoring of all the managed APs on the network. In addition, the easy-to-install ZAC Wireless CPE
is also a high-performance last-mile broadband solution that provides reliable wireless network
coverage for broadband application.
Key Features

Centralized configuration control for your network

Compliant with IEEE 802.11n standard

Support passive PoE supplied with 24V.

High reliable watertight housing endures almost any harsh environments

Three management modes including AC, AC+Thin AP, Thin AP and Fat AP.

Four wireless operation modes in FAT AP mode including AP, Wireless Client, WDS and AP
Repeater.

Up to 8 BSSIDs available for service deployment

Support encryption: 64/128/152-bit WEP and 802.1X, WPA, WPA2, WPA&WPA2,WPA-PSK,
WPA2-PSK, and WPA-PSK&WPA2-PSK

User-friendly Web and SNMP-based management interface