Zcom ZAC Series, User Manual

Page: 56 / 109

Chapter 5 Management Page 56
Click Apply and the IP address will be added in the list. To delete the restricted source ports, click
Select checkbox of the designated ports and click the Delete Selected button. You may delete all
the IP addresses in the list by clicking Delete All .

Destination Port Filtering:
You may create and activate a rule that filters a packet based on the destination port from your local
network to Internet. Check
“
Enable Destination Port Filtering
” to activate rule.
Port Range : Enter the port range you would like to restrict.
Protocol : Select port protocol: Both , TCP , UDP .
Comment : Make comments to record your filtering rule.
Click Apply and the IP address will be added in the list. To delete the restricted destination ports,
click Select checkbox of the designated ports and click the Delete Selected button. You may
delete all the IP addresses in the list by clicking Delete All .