background image

zBoost

®

 SOHO YX560Y User Guide

10

zBoost

®

 SOHO YX560Y User Guide

11

Technical Specifications

Product Specifications for zBoost SOHO YX560Y

PCS band
Frequency  

Uplink: 1850 to 1910 MHz   

Downlink: 1930 to 1990 MHz

System Gain
Antenna: Signal

N/A*

Antenna: Base Unit

1 dBi Whip

PCS band supported

A, D, B, E, F, C

Cellular band
Frequency  

Uplink: 824 to 849 MHz   

Downlink: 869 to 894 MHz

System Gain

67 dB

Antenna: Signal

11 dBi Yagi; F-type male

Antenna: Base Unit

1 dBi Whip

CEL band supported

A, B, A’, B’

General
Networks

CDMA, GSM, TDMA, AMPS, GPRS, EDGE, 

EVDO, 1xRTT, UMTS, HSPA, 3G

Power Consumption – Power Supply 

Current

3W standby; 7W max signal - 5.0VDC, 2.0A Max

Wall Supply Input ; Voltage

100-240VAC, 50-60 Hz

System Certifications

FCC Parts 15 & 24 (PCS), Parts 15 & 22 (CEL), 

Industry Canada

Base Unit Size and Weight

5” x 7” x 1.25” – 9 oz.

Operating Conditions 

Indoor Use Only (40° - 105° F)

Coverage (open areas)

up to 6500 sq ft

This product uses patented technology to protect the carrier network

Product is covered by patent US 7,706,744.  Other U.S. and foreign patents pending.

* YX560Y is designed to support 800MHz/CEL and thus does not include a 1900MHz/PCS Signal 

Antenna. To include PCS coverage, the addition of a YX023-PCS Signal Antenna and YX015D 

Signal Combiner is required.

Handles all PCS or CEL protocols and includes multiple patented and patent pending technologies 

to provide low-cost coverage while continually adapting to signal to prevent interference and remain 

transparent to the wireless network. Provides an indicator if the antennas are positioned improperly, 

but will NOT suffer damage of interfere with the Carrier Network.

Frequently Asked Questions

What can I expect my cell phone signal range and strength to be inside my home or office?

The closer you are to the base, the stronger the signal. This will vary with different conditions. Some 

of the conditions that will affect the improved coverage area are signal strength outdoors, the type 

of building materials in the home, the placement of the unit and the antenna’s proximity to cellular 

towers.

You can expect that your indoor coverage will be improved. You will be able to make calls where 

you couldn’t before. The degree of improvement will depend upon many factors. The intent of 

zBoost® products are to bring outside coverage inside. Just as the signal bars move up and down 

when outside, the boosted signal will fluctuate in a similar fashion. 

Is a cellular phone signal booster the same as a wireless router; will it help my WiFi signal? 

The Wi-Ex® unit will not help your WiFi service. This unit is designed to work with wireless PCS and 

Cellular phones and devices. The WIFI in your home or office operates on a different frequency.

Is your product available for international use?

Yes, we have a product that works on European UMTS/HSPA frequencies. 

zBoost® ONE YX400-U

 

for devices on the 2100MHz can be used for voice and data overseas. 

Why isn’t my cell phone indicating more signal with more bars?

You may not always observe more bars that gain on your signal meter because of the signal 

spreading out from the antenna. If your phone has a dB meter, 3dB is a significant increase of 2x, 

6dB is 4x, and 10dB is 10x. On a four bar phone, one "bar" equals about 10dB.  

The increase in signal you will see depends upon:

• 

The level of signal at the Signal antenna (outdoor)

• 

The care of the antenna placement (three feet away from metal, adequate antenna 

separation [15 feet of 

vertical

 separation is recommended])

• 

The signal already present inside (related to building losses)

• 

The distance of your phone/device from the Panel Antenna (signal spreads or diminishes 

rapidly with distance).

There are usually several cell phones in use at one time in my home, will your product boost 

all of our signals simultaneously?

This zBoost unit is designed to cover multiple signals simultaneously and will allow multiple users to 

operate at the same time.

Does the zBoost® work if you have no bars?

No, if no signal is present outdoors zBoost products will not work for you. Also, keep in mind if your 

best signal is 1 bar at the Signal Antenna, your coverage will be limited to a small room. You could 

improve that with an upgraded antenna. (See page iv).

Summary of Contents for YX560Y











Reviews: