Zaxcom ZMT4 Menu Navigation
9
Sub Menus
Menu groups
The ZMT4 has six sub menu groups
•
Time Code
- Changes the time code parameters of transmitter.
•
Transmit
- Changes the parameters of the UHF transmitter.
•
Record
- Changes the parameters of the on-board recorder.
•
ZaxNet
- Changes the parameters of the ZaxNet transceiver.
•
Audio
- Changes the parameters of the transmitted and recorded audio.
•
Setup
- Changes the parameters of the general operation on the transmitter.
Accessing and navigating the menu groups
From in the home screen press the CARD key three times, the DEC key three times, or hold the MENU key while
booting up, to access the six menu groups. Then pressing the INC or DEC key will cycle between the menu
items.
Entering and navigating a sub menu
When landing on the desired menu group press the MENU key to enter that menu.
To return to the top of the menu press the MENU key to cycle to the top or press and hold the MENU key for
1.5 seconds.
Exiting the extended menu
Press the CARD key 3 times or press the MENU key to cycle through the sub menu items until HOME MENU is
displayed then press the MENU key.
