Chapter 4_______________________________________Zaxcom Digital Wireless System User’s Manual
34
Chapter 4
– ZFR100 Adapters
STA100 Stereo Adapter
The STA100 allows the unit to record in stereo from a Line-level source.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
Power Connector
6. Output Level Adjustment
2.
Timecode Input Connector
7. TA-5M Audio Input Connector
3.
Screws to Attach to ZFR100
8. Level Trim for Channel #2 (right)
4.
Electrical Contacts for ZFR100
9. Level Trim for Channel #1 (left)
5.
Audio/Timecode Output Connector
Figure 4-1 STA100 Front & Back Views
Installation
The STAxxx attaches to the ZFR100 with two screws.
Tighten the two screws, alternating between them, until the adapter and recorder are tightly connected.
CAUTION:
Do not over-tighten the screws.
Connect a Line-level source to the TA-5M connector. The Line-level input needs to be between -6 and +8 dBu.
Adjusting the Input Level
Output tone from a mixer and adjust the 2 input pots so the meter on the LCD screen is at a level of -20 dBFS.
The stereo adapter does not have a limiter function so it is important not to overdrive or clip the input of the
stereo adapter.
