Zaxcom ZFR100, User Manual

Page: 20 / 71

Chapter 2____________________________________Zaxcom Miniature Digital Recorder User’s Manual
20
Timecode Jam Mode page
TC JAM MODE:
MANUAL (OFF)
Page purpose: This page maintains how received timecode will be used.
Parameters:
 AUTO-LOAD
– start and stop the recorder, based on the Timecode Source page {p.20} selection:
o
If an IFB100 is being used - when the IFB100 timecode starts and stops.
o
If an STAxxx/TCA100 is being used and the timecode source is connected to it when the timecode source
starts and stops.
 AUTO-JAM
– continuously jams timecode, based on the Timecode Source page selection.
 MANUAL (OFF)
– jam timecode once, based on the Timecode Source page selection.
Timecode Source page
TC SOURCE:
IFB (RF)
Page purpose: This page maintains which input to use as the timecode source.
Parameters:
 SIDE CONNECTOR
– Accept a timecode source connected to the attached STAxxx‟s side connector.
 IFB (RF)
– Accept a timecode source connected to the IFB100.
 AUDIO INPUT
– Accept a timecode source connected to the Audio Input connector.
Earpiece Source page
IFB EARPIECE:
IFB RX AUDIO
Page purpose: ZFR100 ONLY – This page establishes the source for the audio being monitored during
operation.
Parameters:
 IFB MIX ALL
– the earpiece receives its audio from both the media and the IFB receiver.
 IFB RX AUDIO
– the earpiece receives its audio from the IFB receiver.
 REC/PLAY
– the earpiece receives its audio from the media.
Media Erase & Format page
PRESS UP KEY 5X
TO ERASE CARD
SUCCESS (REBOOT)
#### MBYTES
FORMAT FAILED
ERROR ##
Page purpose: This page erases and formats a MiniSD card.
This must be done before the card can be used (or to erase the contents) in the recorder.
To Format a Card:
1. Before formatting the card, enter the name ( Track Name page {p.29}) to be used for this card.
2. With the power „OFF‟, insert the memory card into the media slot with the label to the back of the unit. Press
it all the way in; it will lock down.
3. Press and hold the MENU key while the recorder is powered up.
4. Repeatedly press the MENU key until the screen displays
PRESS UP KEY 5X TO ERASE CARD
.