Zaxcom TRXFB3, User Manual

Page: 16 / 36

Zaxcom TRXFB3 ZaxNet Menu
16
ZAXNET MENU
ZaxNet Mode
This menu sets the mode of the ZaxNet receiver.

OFF - The ZaxNet receiver is disabled. The TRXFB3 will not receive ZaxNet commands or time code.

RX - The ZaxNet receiver will receive ZaxNet commands and time code.
This screen will display what ZaxNet data is being received by the TRXFB3. Including total received
information packets, ZaxNet TC received and remote control commands received. This information is used
for debugging purposes.
ZaxNet Receive Frequency Set
This menu will only appear if the TRXFB3 is set to receive (RX) mode
The ZaxNet receive frequency is the frequency that the TRXFB3 will get its IFB audio, wireless time code and
remote control commands on. This frequency will need to match the frequency of the corresponding ZaxNet
transmitter. The ZaxNet transmitter can be a QRX with QIFB, Nomad, TRX900CL or IFB100/200. The TRXFB3 can
also receive ZaxNet time code from another TRX transmitter or a ZFR recorder that is transmitting ZaxNet on
this frequency. Please keep in mind that the range will be limited when receiving ZaxNet from a TRX or ZFR.
When the TRXFB3 is receiving a valid ZaxNet signal the signal strength will be shown as well as signal strength
meter - two lines that run vertically on the far right side of the screen.
Group Code Set
This menu is where the TRXFB3 is assigned to a group. The group code allows transmitters to be grouped
together so they can be controlled via ZaxNet without affecting others.
So for example a TRXFB3 set to Group 1 will be controlled by a ZaxNet transmitter set to Group 1 and a TRXFB3
assigned to group 2 will be controlled by a Group 2 ZaxNet transmitter. This is helpful if two or more people on
set are sending ZaxNet commands. Therefore the different group codes allow each person to be independent
and not interfere with each other. Most users leave the group set to 1 on all of their Zaxcom products. Group
codes can be set from 1 to 99.
Unit Code Set
ZAXNET MODE: OFF
RX FREQ : 2.403 RX
SIGNAL : A28 B27
REMOTE CONTROL
GROUP CODE = 1
REMOTE CONTROL
UNIT CODE = 001