Zaxcom RX-8 Extended Menu
9
Extended Menu
Navigating the Extended Menu
•
Press the RECEIVER key for the desired receiver please note the receiver must be in the home screen.
•
Press and hold the DEC key for 1.5 seconds to enter the extended menu.
•
When in the extended menu, press the MENU key to advance to the next menu.
Exiting the Extended Menu
•
To exit the extended menu - press and hold the MENU key then press the INC key.
Modulation Select
Modulation is simply the way a transmitter “modulates”, or sends, its signal to the RX8. This setting needs to
match the modulation mode that the corresponding transmitter is set to - if the two setting do not match the
RX8 will not be able to receive and decode the signal from the transmitter. Please note If the modulation is
changed the RX-8 will need to be rebooted. Mono / XR / stereo, or ZHD96 can be selected.
Single / Dual Mode Select
•
SINGLE
- Configures two of the four MRX receivers to operate as a single receiver. In single mode the MRX can
receive audio from one transmitter. This mode offers true diversity and will give better transmission reliability.
When in single mode only one frequency can be tuned for each receiver pair.
•
DUAL
- Configures two of the four MRX receivers to operate as two independent receivers. In dual mode the
MRX can receive audio from two transmitters. In dual mode there are two separate frequencies that are tuned
for each receiver pair.
RX MODE:
SINGLE
RX FORMAT:
MONO XR OR STEREO