V1100 User Manual
23
Network Basic
Please refer to
p.9~11
Network Advanced
RTSP
General
RTP Port Range
: The default value of port range is 5000 ~ 7999 and can be changed from 1124 to
65534.
RTSP Port
: The default value is 554. If the Video Server connected with router and installed outside
are over 2 sets and all of them need support RTSP, please fill the value in the blank space in the range
from 1124 to 65534.
RTSP Configuration
Configure the RTSP by profile, then enable or disable the authentication.
Multicast
Status
: This can be enabled or disabled the multicast.
Access Name
: This will be shown and changed along with the profile you select.
Multicast Address
: Specify the multicast server address.
Video / Audio Port
: Specify the transmission port number of the video data, from 1124 to 65534.
Time to Live
: Set the maximum TTL that multicast can pass through. The default value is 15.
UPnP
If you have a Router
to access to internet and the Router supports UPnP IGD function, you need to
turn on the UPnP Port Forwarding function.
HTTP port
: Enter the HTTP port number and default HTTP port is 80.
SSL port:
Enter the SSL port number and default SSL port is 443.
RTSP port:
Enter the RTSP port, default value is 554 for computer view.
Note : UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It allows devices
to connect seamlessly and simplify the implementation of networks in the home and corporate
environments.
Summary of Contents for V1100
Page 1: ...0...
Page 7: ...V1100 User Manual 5 Main Page Toolbar of Main Page...
