Zavio F7110, Quick Installation Manual

Page: 4 / 14

4
Install the hardware and connect all cables
a.Mounting the Lens to the Camera
1. Mount the lens by turning it clockwise on the camera until it stops.
2. Unscrew the focus controller to adjust the focus.
3. Tighten the focus controller when completing.
b. Wall mounting and Ceiling mounting
1. Use the 3 supplied screws to fix the base plate to a flat surface.
2. Loosen the lock ring to adjust the desired angle of the camera.
3. Tighten the lock ring.
c. Connect all cables
c1. Without Power over Ethernet (PoE) connection
( F7110 / F7115 )
1. Connect the power adaptor to the IP Camera.
2. Using a standard RJ-45 network cable, connect the IP Camera
to a normal Hub / Switch / Router.
c2. Power over Ethernet (PoE)
( F7110 only )
1. Using a standard RJ-45 network cable, connect the IP Camera
to a PoE-enabled Hub / Switch / Router
c3. Wireless connection
( F7115 only )
1. Connect the power adaptor to IP Camera.
2. Connect to Wi-Fi