Zavio F511w, User Manual

Page: 76 / 103

 Alarm

Motion Detection : Click it on for using Motion Detection function as a sensor. You
can set motion detection function at the motion detection function page.
76
Note: You can set motion detection at motion detection page. (Please go “Setting →
Advance → Motion detection → Setting”) For more details, you can check Chapter 8.7.
Note
：
Motion Detection works only when the MPEG4 function is On.

Parameter: the parameter of CGI (defined in URL of HTTP → General) is
from your target device. For example, move=down.

Message: message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note.
For example: PTZ down.