background image

F3105 User Manual   

8.4 Security 

Click the folder of 

Security

 to display the sub folders including 

Account and HTTPS. 

 

8.4.1 Account

 

The device fault account and password setting is “admin / admin”. That means everyone 

who knows IP address can access the device including all configuration. It is necessary to 

assign a password if the device is intended to be accessed by others.   

 

 

 

 

 

 

 

 

 

User Name

S

et a user name between 4-16 characters. 

 

Password

:

 

Set a password between 4-16 characters. 

 

Re-type Password

: Re-type the password to confirm. 

 

Viewer Mode

: Set the user mode among Admin, Operator, and Viewer. Different viewer 

mode has different limits of authority. 

The Admin mode has all authority of configuration.   

The Operator mode can not only view the Live View but also control the PTZ (only 
for PTZ models). 

The Viewer mode only can view the Live View. 

 

Viewer Authentication

: Select On, allows any viewer direct access to Live View. Select 

Off, allow admin, operator, or viewer access to Live View. 

Setting-Basic 
Security 

 

50

Summary of Contents for F3100




























































































Reviews: