Zavio D6111, User Manual

Page: 53 / 89

D6111 User Manual
 Suffix : Select a suffix to add to the file name

Date & time : The date & time suffix is added to the Image file name. The date/time
suffix consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits), and consecutive number (2 digits),
thus 14-digit number is added to the file name.

Sequence number : A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.

Sequence number clear : Click Clear and the suffix of the sequence number returns
to 1.
 Alarm

Motion detection : Click it on for using Motion detection function as a sensor. You
can set motion detection function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion detection → Setting”) For more details, you can check Chapter 8.9.

Audio detection : Click it on for using Audio detection function as a sensor. You can
set audio detection function at the audio detection function screen.
Note: You can set audio detection at audio detection
screen
. (Please go “Setting →
Advanced → Audio detection → Setting”) For more details, you can check Chapter 8.10.

Network link down: Click it on to receive a snapshot or a video clip while network
link down. If Attached file type (go
“Setting → Advanced → FTP client → General”
)
was clicked as video clip, you can using Alarm buffer function as a sensor. It’s for
recording audio file in the IP CAM before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced →
Alarm buffer → Setting”) For more details, you can check Chapter 8.8.

Alarm Input : Select the connected alarm. Sensor input1 : The external sensor which
is connected to sensor input1 of the alarm input.
Note: You can set the alarm input function at alarm input screen. (Please go “Setting →
Advanced → Alarm input → Setting”). For more details, you can check Chapter 8.7.
 Effective period : Set the period when the periodical sending is effective.

Always : The periodical sending is always effective.

Schedule : You can specify the period when the periodical sending is effective in the
Schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced
→ Schedule → Setting”) For more details, you can check Chapter 8.6.
50
Setting-Advanced
FTP Client