background image

22 

 

 

IP  Notification

:  The  event  is  triggered  when  the  network  being  restarted  or  the  IP  being  changed.  And 

there are optional network types to select, such as 

DHCP

Static IP

 and 

PPPoE.

 

 

Action 

There are multiple choices for action taking which is optional for user to select all of them or part of them: 

Send Image

Send Notification

Activate Digital Output 

or

 Night Mode.

 

 

Send Image: 

You may set up where the image sent to, options like event server and SD card. You must 

configure it first, please refer to 

Event Server

 

Send  Notification: 

Firstly  got  to  HTTP  server  configure  the  HTTP  server  URL,  port,  User  ID, 

Password, and Proxy server settings. 

Note: The setting of URL should be the same as CGI.

 

 

Active Digital Output: 

Firstly configure the PTZ to set up the preset positions and tour you desired. 

You may select to return to the last position after the event being triggered. 

 

PTZ  Action: 

Firstly configure the PTZ to set up the preset positions and tour your desired. You may 

select to return to the last position after the event being triggered.

 

 

Schedule 

You  may  set  up  the  event  schedule  as  “always”  or  scheduled  by  working  day,  weekend  or  night  mode.  You  must 

configure schedule before using it. 

 

Motion Detection 

Add the motion detection zone and name it, you can adjust the zone of detection with the mouse. There are 10 

for detection zone at maximum. The bar on the top of motion detection area is red when the alarm is triggered. 

Threshold:

  Set  the  threshold  of  the  alarm  in  the  motion  detection  zone.  The  higher  threshold  is,  lesser 

detections can be triggered. 

Sensitivity:

 Set the sensitivity for motion detection zone. The higher sensitivity is, the more sensitive it gets. 

 

Audio Detection 

Select “on” if you want to activate the audio detection. The bar on the top of motion detection area is red when 

alarm is triggered. 

Threshold: 

Set  alarm  threshold  for  audio  detection.  The  higher  threshold  is,  the  lesser  detections  can  be 

triggered. 

Sensitivity: 

Set alarm sensitivity for audio detection. The higher sensitivity is, the more sensitive it gets. 

Summary of Contents for D3100





























Reviews: