D.
Wall mounting and Ceiling mounting
a.
Attached the alignment sticker to the wall. Drill five holes into the wall, which four for screws and one
for cable. Then hammer the supplied plastic anchors into the screw holes and secure the mounting
plate with supplied screws (T1/4”*32).
b.
Hang the wall mount bracket on the mounting plate and fix it with the supplied screws.
c.
Adjust the angle of the wall mount bracket to aim the shooting area.
E.
Connect all cables
a.
Without Power over Ethernet (PoE) connection
1.
Connect the power adaptor to the IP Camera.
2.
Using a standard RJ-45 network cable, connect the
IP Camera to a normal Hub/ Switch/ Router.
b.
Power over Ethernet (PoE)
Using a standard RJ-45 network cable, connect the IP
Camera
to a PoE-enabled Hub/ Switch/ Router.
7