F7110 / F7115 User Manual
Authentication
:
Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, select one of the
authentication methods from the followings.
SMTP
:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP
:
Select when POP before SMTP authentication is necessary
when an e-mail is sent.
Note
：
When you set to On, be sure to select either or both SMTP or / and POP before SMTP.
POP server name
:
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
User name, Password
:
Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
Recipient e-mail address
:
Type the recipient e-Mail address up to 64 characters. You
can specify up to three recipient E-mail addresses.
Administrator e-mail address
: Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the
SMTP server.
Test:
Click to test your SMTP setting works or not.
Overwrite:
Select on to disable capacity warning and overwrite your memory card when
space free is not enough.
File Manager:
click to manage your memory card.
Refresh
:
Click
to refresh this page.
Back
: Click
to back folder.
File Name
: Click the following file name to forward folder.
Select All
: Select all to delete or save to network storage.
Delete
: Delete selected folder or files.
Save to network storage
: Save selected folder or files to configured network storage.
Setting-Advanced
73
Network Storage