Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 62 / 96

62 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
Checking proper screw tightness on the hydraulic tube flanges
To check proper screw tightness on the hydraulic tube flanges, refer to “7.2.2.11 how to make sure the blade
screws and bolts are tightened properly” on page 70 �
Visual check on the plate and pictograms
To visually check the plates and pictograms, make sure the ones applied to the attachment are:
∂ present;
∂ intact;
∂ legible�
7.2.2.2
hydraulic cylinder checks
The checks on the hydraulic cylinder include:
∂ checking the shaft output area on a daily basis;
∂ checking the hydraulic cylinder head screws on a monthly basis;
Checking the shaft output area
To check the shaft output area, make sure there are no oil leaks in the shaft output area�
Checking the hydraulic cylinder head screws
To check the hydraulic cylinder head screws, perform the operations below in the following order:
1� make sure the hydraulic cylinder head closing screws are intact;
2� make sure the hydraulic cylinder head closing screws are tightened properly, refer to
“7.2.2.11 how to
make sure the blade screws and bolts are tightened properly” on page 70 �
7.2.2.3
swivel hydraulic coupling checks
The checks on the swivel hydraulic coupling include:
∂ visually checking the swivel hydraulic coupling on a daily basis;
∂ making sure the screws locking the rotor onto the stator are tightened properly on a weekly basis�
swivel hydraulic coupling visual check
To visually check the swivel hydraulic coupling, make sure there are no oil leaks in the swivel hydraulic coupling�
Making sure the screws locking the rotor onto the stator are tightened properly
To make sure the screws locking the rotor onto the stator are tightened properly, refer to “7.2.2.11 how to
make sure the blade screws and bolts are tightened properly” on page 70 �
7.2.2.4
Clutch checks
The clutch checks include:
∂ checking the correct tightening of the clutch screws every 16 hours of operation;
∂ checking the state of wear of the clutch spring pad on a weekly basis�