ZMCE 1.1AD
7
AUTO
In the Auto measurement mode, press F1 to refresh the
test result. Press F3 to enter the setup menu.
Using F1, F2 select a channel, Using F3 select or deselect it,
finally press F4 to save
TILT
In the TILT measurement mode, using F1
or F2 select a channel.
The channel number, channel type, and
signal level will show in the right of the
screen, as well as Max signal level, Min
signal level, the difference between the
Max and the Min.
Press F3 to enter the TILT channel setup
menu. Using F3 select or deselect a
channel. Press F4 to save and exit.
TRUNK
In TRUNK voltage measurement mode,
the unit automatically identifies AC or DC
and show test results on the screen.
Internal battery voltage can also be
showed.
