Zass ZHM 07, Operating Instructions Manual, Page: 4 / 12

3. OPERATION
4
BEFORE USING MIXER
Remove any packages, disassemble any detachable parts. Clean the dough hooks
and beaters. Before assembling the mixer, make sure the power cord is unplugged
from the power outlet and the speed selector is at the “0” position.
USING YOUR MIXER
1. Assemble proper beaters or dough hooks into mixer.
NOTE: Beaters can be inserted in either socket, as the beaters are identical. For
dough hooks, the one with washer can only be inserted into the bigger socket and
the other one can only be inserted into smaller one. The two dough hooks can not be
inserted in reverse.
2. Ensure that the unit is at the “0” setting, then plug in the power source.
3. Set the speed selector to your desired speed. There are 5 speed settings to be
selected. When kneading yeast dough, suggesting to select the speed selector by
lower speed and then by higher speed to achieve the best results. The mixer will run
at the highest speed when pressing turbo button.
WARNING:
Do not stick knife, metal spoons, fork and so on into bowl while operating.
4.
The max operation time per time shall be less than 5 minutes. Minimum 20
minutes rest time must be maintained between continuous two cycles.
NOTE:
During operation you may rotate the bowl with hand to achieve the best results.
5. When mixing is complete, turn the speed selector to “0” setting, and unplug the cord
from power outlet.
6. If necessary, scraping the excess food particles from the beaters or dough hooks by
rubber or wooden spatula.
7. Hold the beaters or dough hooks with one hand and press the Ejector button firmly
down with the other hand to remove the beater or dough hooks.
NOTE:
1). Remove the beaters or dough hooks only the speed selector at the “0” setting.
2). During operation, you can put the mixer vertically, but make sure the speed selector
is at the “0” setting.
2. KEY TO MACHINE PARTS (Page 2)
1
2
3
4
5
6
7
- Turbo Button;
- Speed Selector;
- Ejector Button;
- Dough Hook;
- Beater;
- Main Body;
- Power Cord;