2.
Select a location near your door entrance against a wall. The gatestation can be mounted against a
gooseneck and be covered with a metal housing as the antenna is external and range will not be
affected.
3.
It is advised that the intercom is not installed in the vicinity of other electronic devices that may
reduce the operating range such as electric fences, cameras etc.
4.
Use the supplied self tap crews to fix the mounting bracket onto the wall. The supplied paper mask
at the end of this manual can be helpful in drilling the correct position of holes.
5.
Align the two rivets on the mounting bracket with the holes of the metal hangers on the back of the
caller unit, make contact and slide the unit upward. Screw in the supplied machine screw to fix the
caller unit in position.
The caller unit is housed in a high impact ABS/PC cabinet strengthened by an aluminum alloy front
cover to achieve professional grade ruggedness required in most outdoor application. Rubber gaskets
seals around all joints and terminals keep out dust, rain, snow and spray, assuring years of reliable
operation even in harsh environment. The unit meets to IP-54 standard and can operate from -30°C to
55°C.
Important terms
OPERATING CHANNEL: There are 4 channels to select from as there are 4 different frequencies. If
there is interference on one channel it is recommended changing the channel. Note all the handsets have
to be set on the same channel.
3 DIGIT CODE: This is a number consisting of 3 digits such as 001, 002 etc assigned for each house.
All handsets with same code will ring simultaneously when called from the gate station and the first
handset to answer will establish communication. Handsets with the same code can intercommunicate
using the handset talk button similar to that used in two-way radio.
PAIRING: Each handset must be linked to the gatestation. Pairing is where the handset learns the unique
code from the gatestation.
PTT: Push-To-Talk is the method for conducting a conversation with a simplex device. The resident can
answer calls and reply by pressing the PTT button on the handset. Press and hold down the PTT button
when speaking into the microphone.
ID CODE: There are 4 different ID codes which can be selected. ID code is used to avoid interference
from other systems and to provide further security with gate opening.
ICASA # TA-2010/586