Overview:
The Zartek Wireless Multi Intercom System is newly developed and three years of R&D in the making.
It is fully approved by ICASA. Applications for this system include housing complexes, apartments and
office blocks, large estates, long driveways etc.
This system can accommodate
80 separate channels
. Communication is initiated from the gatestation
by selecting a
3 digit code
such as 001 or 901 and pressing the # button. Only the selected houses
handset will ring and communication is established. Communication is
simplex
so only one person can
speak at a time but the
gatestation’s microphone is always active
so the visitor does not have to press
any key to speak. The inside
handset can enter into the conversation
at any time by pressing a PTT
button.
There are
2 triggers
that can be activated from the handset for opening a motorized gate or striker lock.
Multiple handsets
can be added for the same house to have internal communication. Range is terrain
dependant and is
100m in built-up areas and 350m in more open areas
. The
external antenna
is
mounted as high as possible for improved coverage and audio.
Note: This Installers manual is intended to explain programming and installation, please refer to the
User’s manual for operating instructions.
Setup Procedure:
1)
Charge gatestation and handsets for at least 2 hours before programming and testing.
2)
Program one code on gatestation manually or via PC. Do not program or pair gatestation outside;
it is easier and better to do all programming on a table before going on site.
3)
Pair handsets to programmed codes.
4)
Place gatestation near gate (wall or gooseneck). Connect external antenna to gatestation and
mount temporarily for testing.
5)
Do range tests to furthest point of usage. Test handset audio and gate triggering in actual house
or unit. Press code on gatestation and answer on handset.
6)
Place antenna higher if more range is required.
7)
If range test is successful, program all names and unit codes.
8)
Pair each handset or handsets on same code individually.
9)
Once all paired, test communication from each handset.
10)
Mount gatestation and external antenna. Connect to fixed power and gate controller board.
11)
Place each handset in unit and do final communications test.
Summary of Contents for CDP-808
Page 12: ......
