SAFETY PRECAUTIONS
INSTRUCTIONS TO CHARGE A DEVICE
For example: to charge a mobile phone or other electronic device
1. Do not disassemble, break or puncture the battery.
2. Do not modify the built-in circuit in any way. Improper usage, dropping or short
circuiting of the battery may damage the battery permanently.
3. Use and store the product in normal conditions. Keep the powerpack away from
heat, fire, wet or damp places as it may cause fire or explosion (The working
temperature range: -10~~60 degree).
4. To maintain life-span, store the powerpack with sufficient charge. Capacity may
decrease if the battery is kept flat for extended periods.
5. Store the product carefully and out of reach from children.
6. Extend the retractable cable by pulling gently on both cables. Do not over pull the
cable beyond the limit.
Please read and observe all warning and instructions given on this owner's manual
and those marked on the unit before using. This product has been designed and
manufactured to assure personal safety. Improper use can result in danger. Please
observe the following procedures for installation, use and servicing.
1) Connect the supplied USB/DC cable (or devices own USB cable) to the
powerpack
s USB output port.
2) Press the button to select charging output on (once or three times).
3) Connect the other end of the cable to a device using the appropriate
connector. The device should indicate charging.
4) Extend the retractable cable by pulling apart both cables gently
and lock at different lengths. Release the cable by
pulling both cables slightly and closing slowly.
5) Remember to power off the powerpack
after charging is complete and
disconnect cable.
Ensure powerpack is in charging
mode before connecting to a device
or it may not charge.
