(10) CTCSS CODE FUNCTION
This function can help you select your group (38 CTCSS codes) of users on the
shared frequency. Only the users with the same CTCSS code can listen and talk to
each other.
To select a CTCSS code
•
Press the "
" key twice, the CTCSS code display will flash.
•
Press " " or " " key to select your required CTCSS code (1~38, " 0 " is off).
•
Press the "PTT" key to confirm or press "
" to continue.
•
You have 12 seconds to decide before auto-reverting back to the main screen.
(11) FM RADIO
You can listen to FM Radio with the speaker or through earphone.
•
Press "
" key 3 times to enter FM radio mode.
•
LCD will display the FM radio frequency.
•
Press " " or" " key to change the FM radio frequency.
•
Press and hold " " or" " key to automatically scan FM radio frequencies.
Scanning will stop when it finds a FM radio channel
•
Continue scanning for FM radio frequencies by pressing the " " or" " key.
•
Volume on the radio is adjusted by pressing " " key and then pressing " " or " "
key whilst listening to FM radio.
•
When you receive other 2-way radio call signals, or you press PTT key to
transmit, the unit will automatically switch to 2-way radio mode.
•
After finishing the communication, you can press "
" key 3 times again to enter
FM mode. The unit will remain on the last FM radio frequency you have selected.
(12) SENDING CALL-TONES
You can use 1 of 10 different “Call Tones” to call to attention another user on the
same channel. The 10 kinds of sounds can be used for personal identification
•
Pulse “ ” key once and the tone will sound, the transmit icon
and call tone
icon will appear on the LCD and your selected call tone will be sent.
•
If the “ ” key is held pressed the call will not be transmitted but the LCD
backlight will remain on.
(13) SELECTING A CALL-TONE (10 AVAILABLE)
•
Press "
" key four times, icon will appear and call tone number will flash.
•
Press" " or " " key to select your desired call tone.
•
Press the "PTT" key to confirm or press "
" to continue.
•
You have 12 seconds to decide before auto-reverting back to the main screen.