4
1.4 Information
plate
The information plate is attached to the outside of the side platform profile section.
Replace the information plate if it becomes illegible.
2. Safety instructions
2.1 Intended use
The ZAP telescopic platform ladder is designed solely for the following applications:
• as a climbing aid to perform work, according to the platform height (see "
3.3
Technical data
")
• continuous indoor use
• temporary
outdoor
use
• work involving building materials and other materials, provided that the
maximum permissible load (see "
3.3 Technical data
") is not exceeded
2.2 Improper use
Any use not described in Section 2.1 qualifies as improper use. In particular,
improper use includes the following:
• use of the product as a stair tower or to bridge a gap in order to gain access to
other climbing aids or buildings
• use of the product to support other climbing aids or for any work where the
specified maximum heights are exceeded
• use of the product by more than one person at a time
• using the product to transport equipment, material or persons
• using the product to attach lifting tackle, hoists or similar equipment
• use of the product in unfavourable weather conditions (high winds, storms,
thunderstorms, rain)
• continuous outdoor use (including overnight and after the end of the shift)
• unauthorised structural modifications or incorrectly executed repairs
• use of any parts other than original components and original ZARGES spare
parts
2.3 General safety
instructions
The product is state-of-the-art and constructed in compliance with the recognised
rules of safety engineering. The following section describes the general risks in-
volved when using the product.
D
ANGER
D
ANGER
OF
FATAL
OR
SERIOUS
INJURY
DURING
ASSEMBLY
AND
USE
OF
THE
PRODUCT
!
Follow these basic rules to prevent dangerous situations arising:
> The surface on which the equipment is assembled and used must be even,
immobile and of sufficient load-bearing capacity. If necessary, insert load-
distributing pads under the unit.
Summary of Contents for ZAP Z600
