zarges Skymaste Industrial Z600, Instructions For Assembly And Use

Page: 19 / 196

19
3.4.2 Permissible load
The following limit values apply to all products:
4. Assembly
4.1 Safety instruc-
tions for
assembly
• Observe the safety instructions in
"
2.3 General safety instructions
"
.
• The order for assembly as shown in the illustrations must be observed.
4.2 Assembly
instructions
The assembly instructions are in the form of diagrams.
4.3 Final steps After assembling the product, check the following:
> Have all parts included in the scope of delivery been fitted?
> Have all screwed connections been tightened?
5. Use
5.1 Safety instruc-
tions on use
Observe the safety instructions in
"
2.3 General safety instructions
"
.
W
ARNING
D
ANGER TO LIFE AND LIMB CAUSED BY FALLING FROM THE PRODUCT
Follow these basic rules to prevent dangerous situations arising:
> Never brace your full weight against the guardrails.
> Do not climb on the guardrails. Do not climb on the outside of the product.
> Do not jump on the treads or the platform.
> Do not use the product if it is soiled with substances which might cause you to
slip (oil, grease etc.).
W
ARNING
D
ANGER TO LIFE AND LIMB IF THE PRODUCT TOPPLES OVER OR COLLAPSES
!
Follow these basic rules to prevent dangerous situations arising:
> Always use the ladder elements to climb onto the product.
> Do not exceed the maximum permissible load.
> The product must not be used by more than one person at a time.
> Do not increase the platform height by using ladders, boxes or other devices.
> Do not subject the equipment to one-sided loads. Always distribute loads
evenly on the platform.
Permissible load (incl. persons and weight of material)
Permissible load per rung 150 kg
Total permissible load 150 kg
See illustrations section of this manual.
1-4