10
Always check that the locking mechanisms are
in order before using the ladder.
When the ladder is being retracted, keep your
hands and fingers away from the rungs and
the space between rungs.
Place the ladder with both its feet on the ground such that you
are facing the lock indicators and that you can see the buttons
clearly. This is also the correct side to use when climbing
the ladder.
For additional stability when extending the ladder, place one
foot on the lowermost rung and pull out the two top stiles first.
Now extend the ladder fully.
When extending the ladder, ensure that all rungs snap into
place and the lock indicator is completely green.
Before using the ladder, check and ensure that the ladder's
locking mechanisms are working properly and that all
extended rungs are snapped and locked in place. Never
use/climb the ladder if any one of the extended rungs
is not locked in place or if the locking mechanism is not
working properly.
Do not lean the ladder against an
inappropriate surface.
Never stand on the top three rungs of
a single ladder.
6 Setup and use
This ladder is a special piece of high-quality equipment that needs to be used with care.
Therefore, strictly observe the following step-by-step instructions when using this ladder.
5 Assembly
Always install the stabiliser bar before using the ladder.
The accessories include
2 screws, 1 stabiliser bar,
and 2 push-on end caps
with 2 loose screws.
Firmly tighten the two
screws.
Ensure that the locking pin
snaps in place through the
hole in the aluminium profile.
Fasten the two push-on end
caps using the included loose
screws.
