Setting Up Zappiti Player 4K
Zappiti NAS requires a Zappiti Player 4K to display your video contents (one per zone).
Starting
1. Ensure there is enough space around the player for proper cooling. The space at each side should be
no less than 10 cm. Ensure the RC has batteries installed.
Connect the player to your TV and to other A/V equipment in an appropriate way. Use HDMI connection
to get the best possible quality of video and audio. Make sure to switch off the player and all relevant
A/V equipment before connecting them. Ensure your TV and other A/V equipment are configured to use
proper inputs.
Make sure to use HDMI OUT (not HDMI IN) connection to link your ZAPPITI PLAYER 4K to your TV.
Switch on the player. The player will perform its initial loading procedure, which may take up to about 1
minute. During the loading procedure, "ZAPPITI PLAYER" logo is shown on the TV.
If you do not see "ZAPPITI PLAYER" logo on the TV when you switch on the player, it may mean
some problem with the connection between the player and the TV or that a wrong video input is
chosen in the TV or A/V receiver/switch. In such a case, recheck the cables and the settings of the
TV or A/V receiver/switch, or try to use different cables or a different way of connecting the player to
the TV.
2. Finally, you should see the main screen of the player menu. The main page will show 3 main buttons:
Zappiti (movie collections), Explorer (file explorer), and GooglePlay. Adjust the player settings as
needed using "SETUP" item on the main screen of the player menu. In particular, you may want to
adjust video settings, audio settings, and network settings.
TIPS
: Use the RC buttons UP, DOWN, LEFT, RIGHT, OK, RETURN to navigate through the player
menu. Use the
MENU
RC button to show the list of available commands (PopUp Menu). Use the
INFO RC button to show the INFO panel.
Language Settings
To choose the language of the player menu, please click on "Settings / Personal / Language & input”.
Then, select your language.
Display Settings
To set the display preferences, please click on “Settings / Display”. If you are located in America or
Japan, please select “Auto”. If you are located in Europe, Middle East or Russia, please select, 1080p
50Hz. For all users, then select the 24 Hz option (23.976 Hz output) if your display is compatible with
24p.
Audio Settings
To set the audio preferences, please click on “Settings / Audio”. If your Zappiti Player 4K is connected to
an AV receiver or a sound bar, please select Bitstream mode (passthrough mode). If your Zappiti Player
4K is directly connected to your TV, please select “Downmix 2.0”. Set it for each audio output you are
using (S/PDIF or/and HDMI)
Zappiti NAS RIP
Quick Start Guide. 1
Summary of Contents for NAS
Page 1: ...Quick Start Guide ...
