13
Note:
It is normal for small gaps to appear between the textured side of the
ZappBug thermal unit and the ventilation tube. Bed bugs
will not escape
through these gaps if the ZappBug thermal unit is on. Bed bugs experience
thermal shock and are not capable of moving toward the ZappBug thermal
unit. Always ensure that the ZappBug thermal unit is on when placing potentially
infested items inside the ZappBug Room.
Safety Note:
Always maintain a minimum of 6 inches around the ZappBug
thermal unit when operating
Locate Ventilation Tube
Place Base of ZappBug
Thermal Unit in Tube
Stretch Tube Around
ZappBug Thermal Unit
(Observe “Do Not Cover”
markings)
2. Connect All Four ZappBug Thermal Units
Use & Operation (continued)
3. Connect Recirculation Fan to Room Frame
The included recirculation fan mounts to the room frame. Position the recircula-
tion fan in the middle of the frame against the back wall as shown below. It is
normal for the recirculation fan to tilt slightly to one side. Slide the recirculation
fan power cord through the small opening on the middle top of the back wall.
The recirculation fan may be plugged into the same electrical circuit or outlet
as one of the four ZappBug thermal units. The fan an inlet should face into the
ZappBug Room and the fan outlet should be directed at the floor.
Outlet
Inlet
Hang Recirculation Fan on Room
Frame Against Back Wall
Recirculation
Fan
