Zapp Pure
Info Download
Congratulations
on your new
Zapp Pure
UV
You have chosen the finest UV on the market. Let's take a look at it and its
features.
One of the most important features of the Zapp Pure UV is that it is made of 316 stainless. 316 stainless is
normally only found on very expensive industrial strength UV's. Most stainless steel UV's made for the pond in-
dustry are made of lower quality 304 stainless.
The "Leak Tite Assembly" is made entirely of stainless steel. The is important as the high intensity lamp
produces a lot of heat. Being of stainless steel means no warpage or failure due to heat. Other stainless steel UV's
will use plastic "Leak Tite Assemblies" in this most critical area and experience high failure rates.
The vessel diameter of 4" was carefully chosen as being the optimum diameter to keep the water close to
the lamp and still not cause flow restrictions. Some UV's use vessels that are only 2" and cause restriction while
others use unusually large diameter units. Large diameters don't provide close enough proximity to the lamp for
adequate exposure.
Ballasts that are used in the Zapp Pure units were carefully chosen "Electronic Ballasts" and not the troublesome
"Mechanical Ballasts".
Adjustable pressure switches were used in the Zapp Pure Units to shut the UV off when the water flow is shut off.
Pressure switch "Bypass Switch" has been incorporated in the Zapp Pure to facilitate trouble shooting.
Rest assured that quality was the main consideration when your
Zapp Pure
UV
was designed and assembled.
ZP-5/1200
ZP-10/2400
ZP-20/3300
ZP-40/4400
If after reading these instructions
you feel you still need some guidance
feel free to give us a call at 866-712-
7007 or 405-440-0000
