Page 5
2 GENERAL CHARACTERISTICS
2.1 TECHNICAL SPECIFICATION
Chopper for Separately Excited DC motors ................................................... 1.0÷ 3.5kW
Regenerative Braking.
Voltage Range ............................................................................................ 24-36-48VDC
Maximum Field Current (all the versions) .................................................................. 35 A
Armature Switching Frequency ............................................................................... 16kHz
Field Switching Frequency ........................................................................................1kHz
Maximum Ambient temperature ............................................................................. + 40°C
Minimum Ambient temperature ................................................................................-30°C
Maximum temperature of Chopper......................................................................... + 80°C
FIeld resistance .......................................................................................... 0.3 ÷ 0.6 Ohm
VERSIONS
MAXIMUM CURRENT
BOOSTER CURRENT
VOLTAGE DROP IN
FULL CONDUCTION
24V-36V
200A (3')
220A (10'')
0.23V a 100A, 25°C
24V-36V
300A (2')
330A (10")
0.23V a 100A, 25°C
48V
180A (3')
200A (10")
0.18V a 50A, 25°C
2.2 CONTROL UNITS
2.2.a Microswitches
- Microswitches should have a contact resistance lower than 0.1
Ω
, and a leakage
current lower than 100 µA.
- When full load current is being drawn, the voltage drop across the Key Switch con
tact must be lower than 0.1V.
- If an Electromagnetic Brake is used, the Handle Microswitch must be able to operate
the Brake Coil.
- The Microswitches send a voltage signal to the microprocessor when an operating
request (running) is made.
MENU
Summary of Contents for SEM-1C
