11
Z-150.6 II Input Ends
The Z-150.6 II is the 4-Channel amp and it also has the same basic controls and
features as the other amps but has been adapted for 6-channel use.
• The channels 1/2 do not have a low-pass filter as they will be used either full
range or for mids/highs so there is only high pass here
• Channels 3/4 have high pass, full range, and low pass positions so they can be
used for highs, or they can be band-passed for mid-range use
• Channels 5/6 do not have a crossover function switch as they are band pass
only. They can be used a the bass section with the low-pass and a variable sub
sonic. The sub sonic (which is high-pass), however has a wide frequency range
so it can be used as the bottom of a band-pass to drive mid-bass drivers, if you
have a separate sub amp
• The input mode switch lets you use 2Ch, 4Ch,of 6Ch of input, so you can
drive all the channels from a single 2Ch stereo output from a head unit
* See explanations of common functions on the previous sections
1
• Ch1/2 and Ch3/4 RCA Inputs
2
• Ch1/2 and Ch3/4 variable gain controls
3
• Ch1/2 and Ch3/4 HPF frequency controls
4
• Ch1/2 and 3/4 crossover mode switches
5
• Ch3/4 LPF frequency control
6
• Input mode for 2Ch, 4Ch, or 6Ch inputs
7
• Port for optional dash remote
8
• Ch5/6 RCA inputs
9
• Ch5/6 Sub sonic (HP) frequency control
10
• Ch5/6 LP bass crossover frequency control
11
• Variable bass boost control
12
• Ch5/6 variable gain control
13
• Power and protect LEDs
1
2
4
13
10
3
5
6
7
11
8
9
12
Summary of Contents for Z-150.4 II
Page 27: ......
Page 28: ...1 Modesto California USA Since 1974 zapco com ...
