14
Working with the GUI
Navigation bar
: At the very top of the Screen you will find the Navigation bar.
At the left is the connection indicator. When you open the program while you
are connected to the DSP it will automatically link so you can use the GUI.
If connection is lost it will show Not Linked so you can check the connections.
Next is
Channel Setup
, which is where you will tell the program what inputs and
outputs you are using.
To begin you need to define your system. Fixed 2-Ch inputs (Toslink and Digital
BT) will apply left channel information to all odd number output channels and
right channel information to all even numbered output channels. The analog
input is for Aftermarket head units and OEM (factory) head unit adaptions.
These can be 2-Ch, 4-Ch, or 6-Ch RCA inputs. There are also 4-Ch of speaker
level inputs for OEM Integration. The SUM button will combine highs and lows
from a 2-way factory system to make a single full range signal for processing.
The Custom/Sum lets you determine your configuration. After you have chosen
your input you can move on using the GUI.
Summary of Contents for ST-X DSP 2021
Page 27: ...27...
