zapco ST-2X SQ Owner'S Manual Download Page 17

Page: 17 / 19

ST-6X SQ Speaker Wiring

2-way Active System

Below is a 2-way active system with a high power front stage. It gives 300 watts for

each left and right front speaker plus 300 watts for the woofer or a high power

center channel.

• Since all the channels are bridged, the speakers must all be 4Ω Minimum

• Ch1/2 and 3/4 will high passed just above the lowest recommended

frequency for that speaker

• Ch 5/6 will be low passed (for a woofer) at the same frequency that 1/2

and 3/4 are high passed

5Ch System

The most popular system for a six channel amplifier is right/left front, right/left

rear, and a mono sub.

Note the hookup especially of the sub as Ch5+ and Ch6-. This give the sub the

combined power of the 2 channels. Note that since the sub is a bridged hookup

the sub must be 4Ω minimum.

4Ω / 8Ω

Summary of Contents for ST-2X SQ




















Search results

Summary of Contents for ST-2X SQ

Reviews:

Related manuals for ST-2X SQ

Brands by name

Popular brands

zapco ST-2X SQ, Owner'S Manual

Search results

Summary of Contents for ST-2X SQ

Reviews:

Related manuals for ST-2X SQ

Brands by name

Popular brands