27
adjustment recently. This is to prevent the accidental loss of your current
settings if you have not yet put them into a memory.
Networking – USB Port - 4
Yes, the DRC-SL is a Zapco Digital Programming Network piece. Your
DRC-SL is addressed in the network and you can control all digital functions
of up to 16 amplifiers. Of course the system can be controlled by either the
DRC-SL or by a PC. To make it easy to plug your PC into the system, we
have included a USB port right on the DRC-SL, as well on every DC
Reference amplifier. So if you prefer using the PC, you can plug it in right at
the in-dash controller and never have to disturb your installation.
Adjustment Screen
You will find that navigating through the DRC-SL menus is quick and
easy with just a little practice.
The DRC-SL adjustment screen has several areas. Toggle the Control
joystick right to move from one area to the next. Toggle the control left to go
back. Toggling the stick continually left will return to the home screen and
save any current settings you have made in a “temporary” memory.
The shaded area and the Up/Down arrows highlight the active screen
area as you move through the menus.
Function:
This area chooses the DSP function you will work with.
Toggling the control up or down to set:
a. Sensitivity (input gain
b. Volume (Output gain)
c. Q-Bass (Bass Boost)
d. Crossover
e. Equalizer
f. Time Delay
g. Source (of input for adjustment channel)
h. Mode (Choose which functions will be active)
Summary of Contents for DRC-SL
Page 1: ......
Page 4: ...3 How a Balanced Signal System Works...
Page 16: ...15 At screen D click Next to go to Screen A and proceed as above...
Page 33: ......
