Step 18
å
Carefully stand your unit upright.
å
To insert the drawers into your unit, tip the front of the drawer down and drop the glides on the drawer behind the
glides on the unit. Lift the front of the drawer up and slide it into the unit as shown in the upper views.
å
To make adjustments to the drawers, loosen the SCREWS in the DRAWER FRONT BRACKETS, make needed
adjustments, and tighten the SCREWS.
å
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S)
into the top of the unit and a BLACK 2-1/4" FLAT HEAD SCREW (26S) into a stud in your wall.
å
Apply the WARNING LABEL (5L) to the upper DRAWER LEFT SIDE (D213). You should be able to read the label when
the drawer is open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as shown
in the diagram.
å
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
WARNING
L
D2
L
M
M
J
K
40 lbs.
25 lbs.
30 lbs.
25 lbs.
1G
1S
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
BLACK 2-1/4" FLAT HEAD SCREW
(1 used in this step)
26S
And to celebrate, why not share your success story?
D213
5L
Page 22
