background image

5

Cleaning and Maintenance

Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.

General cleaning

Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
Regularly wipe over the hob top using a soft cloth weel
wrung out in warm water to which a little liquid detergent
has been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is
recommended that a proper cleaning product is used.

Pan supports

The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.

Ignition candle

The electric ignition is obtained through a ceramic
"candle" and a metal electrode (fig.1-lett. C). Keep these
components well clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.

Cleaning of the hotplates

Spills on the hotplates should be removed using warm
water and a soft cloth.
Alternatively, wipe the plates with a drop of olive oil on a
kitchen towel (while the plates are still warm).

Periodic Maintenance

Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.

The periodic lubrication of the taps must be
carried out by qualified personnel, which you
must refer to also in case of malfunctioning.

Fig. 3

FO 2110

Service and original spare parts

This machine, before leaving the factory, has been tested
and studied by many experts and specialists, in order
to give you the best results.

Any repair work which needs to be carried out should be
done with the utmost care and attention.

For this reason we reccomend
that for any problem you contact
the dealer who sold it to you, or
our nearest authorized Service
Centre, specifying the nature of
the problem and the particular
model which you own. Always
Insist on genuine original spare
parts.

Summary of Contents for ZXL 626 IT













Reviews: