Zanussi ZWY 61024WI, User Manual

Page: 10 / 20

USING DETERGENT AND ADDITIVES
1. Measure out the detergent and the fabric
conditioner.
2. Put the detergent and the fabric conditioner
into the compartments.
DETERGENT COMPARTMENTS
Detergent compartment for wash-
ing phase.
Compartment for liquid additives
(fabric conditioner, starch).
CAUTION! Do not
exceed the MAX lev-
el.
ACTIVATING THE APPLIANCE
Press and hold for a couple of seconds the
Marche/Arrêt button to activate or deactivate the
appliance.
A tune sounds when the appliance is activated.
SETTING A PROGRAMME
1. Touch the programme button and set the
programme:
• The indicator of the button flashes
slowly.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
indicator of the button
flashes red
three times.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Touch the button .
• The indicator of the button stops to
flash and stays on.
• The programme starts, the lid locks, the
indicator is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START
The start of the programme can be delayed by 9, 6
or 3 hours.
1. Touch the button
to choose the delay you
want to set.
The indicator of the selected delay is on.
2. Touch the button
:
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you touch the
button
. After touching the button
you can only cancel the delay.
To cancel the delay start:
1. Touch the button
to set the appliance to
pause.
2. Touch the button until the indicator of the
set delay goes off.
Touch the button
again to start the
programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options.
3. Touch
again.
The programme continues.
CANCELLING A PROGRAMME
1. Press the button for some seconds to
cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
10