Zanussi ZWT10710W, User Manual

Page: 12 / 32

CLEANING THE INLET FILTER
Inlet filter must be cleaned if there is
less water.
To clean the inlet hose follow the following steps:
1. Open the drawer.
Screw off the inlet pipe
from the backside of the
machine. Pull out the filter
with long nose pliers and
reinstall it back after being
washed.
2. Use the brush to clean
the filter, after cleaning re-
connect the inlet pipe.
LINT FILTER CLEAN
There is a built-in lint filter in your washer. It can
help to collect lint during washing cycle. It is
suggested to clean the lint filter every 10 cycles.
1. take out the filter.
2. Open the filter, clean it
with water, then place it
back to the washer.
CLEANING DRAIN PUMP FILTER
WARNING! • Be careful of the hot
water!
• Allow detergent solution to cool
down.
• the machine to avoid electrical shock.
• Drain pump filter can filter the fluff
and small items from the washing.
• Clean the filter periodically to ensure
the normal operation of washing
machine.
1. Drain the water out of
the pump, under which
use a container to collect.
2. Open the filter by turn-
ing to the counter clock-
wise.
3. Remove extraneous
matter.
4. Clean the filter.
12