background image

3. Reduce the spin speed if needed, by pressing the

relevant button.

4. Press button 6 .

At the end of the programme, the door can be now opened.

Turn the programme selector dial to O to switch the ma-

chine off.

Remove the laundry from the drum and carefully check

that the drum is empty. If you do not intend to carry out

another wash, close the water tap. Leave the door open to

prevent the formation of mildew and unpleasant smells.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each garment label and

the manufacturer’s washing instructions. Sort the laundry

as follows: whites, coloureds, synthetics, delicates, wool-

lens.

Before loading the laundry

Never wash whites and coloureds together. Whites may

lose their «whiteness» in the wash.

New coloured items may run in the first wash; they should

therefore be washed separately the first time.

Button up pillowcases, close zip fasteners, hooks and

poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special detergent or

detergent paste.

Treat curtains with special care. Remove hooks or tie them

up in a bag or net.

Removing stains

Stubborn stains may not be removed by just water and

detergent. It is therefore advisable to treat them prior to

washing.

Blood: treat fresh stains with cold water. For dried stains,

soak overnight in water with a special detergent then rub

in the soap and water.

Oil based paint: moisten with benzine stain remover, lay

the garment on a soft cloth and dab the stain; treat several

times.

Dried grease stains: moisten with turpentine, lay the gar-

ment on a soft surface and dab the stain with the fingertips

and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing

product used cold. Be careful with rust stains which are

not recent since the cellulose structure will already have

been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast

coloureds only).

Grass: soap lightly and treat with bleach (whites and fast

coloureds only).

Ball point pen and glue: moisten with acetone

1)

, lay the

garment on a soft cloth and dab the stain.

Lipstick: moisten with acetone as above, then treat stains

with methylated spirits. Treat any residual marks with

bleach.

Red wine: soak in water and detergent, rinse and treat with

acetic or citric acid, then rinse. Treat any residual marks

with bleach.

Ink: depending on the type of ink, moisten the fabric first
with acetone

1)

, then with acetic acid; treat any residual

marks on white fabrics with bleach and then rinse thor-

oughly.

Tar stains: first treat with stain remover, methylated spirits

or benzine, then rub with detergent paste.

Detergents and additives

Good washing results also depend on the choice of de-

tergent and use of the correct quantities to avoid waste

and protect the environment.

Although biodegradable, detergents contain substances

which, in large quantities, can upset the delicate balance

of nature.

The choice of detergent will depend on the type of fabric

(delicates, woollens, cottons, etc.), the colour, washing

temperature and degree of soiling.

All commonly available washing machine detergents may

be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics (60°C max) and

woollens

• liquid detergents, preferably for low temperature wash

programmes (60°C max) for all types of fabric, or spe-

cial for woollens only.

The detergent and any additives must be placed in the

appropriate compartments of the dispenser drawer before

starting the wash programme.

If using liquid detergents, a programme without prewash

must be selected.

1) do not use acetone on artificial silk

8

 

Summary of Contents for ZWS 568

























Reviews: