Zanussi ZWS 3121, User Manual, Page: 20 / 24

Positioning and levelling
• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the air
circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
x4
x4
• Loosen or tighten the feet to adjust the lev-
el. A correct adjustment of the appliance
level prevents the vibration, noise and the
movement of the appliance when in opera-
tion.
• The appliance must be level and stable.
Caution! Do not put cardboard, wood or
equivalent materials below the appliance
feet to adjust the level.
The inlet hose
• Connect the hose to the appliance. Loose
the ring nut to set it in the correct position.
• Connect the water
inlet hose to the
cold water tap with
3/4 thread.
Caution! Make sure that there are no
leaks from the couplings.
Do not use an extension hose if the inlet
hose is too short. Contact the service cen-
tre for the replacement of the inlet hose.
Water drainage
There are different procedures to connect the
drain hose:
With the plastic hose guide
20
www.zanussi.com