Problems
Causes
The appliance stops during
a wash cycle :
• the water or electricity supply is defective,
• a “Rinse hold” option has been selected,
• the drum shutters are open.
The lid doesn’t open at the
end of the cycle :
• the temperature inside the drum is too high,
• the lid unlocks 1 - 2 minutes after the end of the cycle.
The
error code ap-
pears in the display
1)
and
the “Start/Pause” button
flashes red
2)
:
• the lid is not closed properly.
The
error code ap-
pears in the display
1)
and
the “Start/Pause” button
flashes red
2)
:
• the object trap is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed to high (see "Installation" ),
• the drainage pump is blocked,
• the standpipes are blocked.
The
error code ap-
pears in the display
1)
and
the “Start/Pause” button
flashes red
2)
:
• the water tap is closed,
• the water supply has been cut off.
Softener runs directly into
the drum when filling the
dispenser box:
• you have gone past the MAX indicator.
1)
On some models, the audible signals can sound
2)
After solving any problems, press "Start/Pause" button to restart the interrupted programme.
Detergents and Additives
Only use detergents and additives designed for
use in a washing machine. We do not recom-
mend mixing different types of detergents. This
may spoil the washing. There are no restrictions
on the use of powder detergents. Liquid deter-
gents must not be used when a prewash has
been selected. For cycles without prewash,
pour the liquid detergent directly into the drum
or use a special dosing device (supplied by the
detergent's manufacturer). Detergent tablets or
doses must be placed in the detergent com-
partment of your appliance's dispenser box.
Technical Specifications
DIMENSIONS
Height
Width
Depth
850 mm
400 mm
600 mm
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
FUSE
230 V / 50 Hz
2300 W
10 A
Level of protection against ingress of solid particles and moisture
IPX4
Water supply
Cold water
10
www.zanussi.com
