1
Programme selector di-
al
Eco
Turn the programme selector dial to the required pro-
gramme. The selector dial can be turned either clock-
wise or counter-clockwise.
The green pilot light of the but-
ton
8
starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another pro-
gramme when the appliance is working, the red pilot light
of the button
8
will flash 3 times and the message
Err
is dis-
played to indicate a wrong selection. The appliance will not
perform the new selected programme.
• To
switch the appliance off
, turn the programme selector
dial to the position
.
• To
cancel
or
change
a running programme, switch the ap-
pliance off by turning the programme selector dial to the
position
. Select the new programme by turning the se-
lector to the desired programme. Start the new programme
by pressing the button
8
again. The water in the tub will be
not emptied out.
2
Temperature button
95°
60°
40°
30°
Push the temperature button to select the most suita-
ble temperature for washing your laundry.
: Cold wash
3
Spin reduction
900
1200
700
By selecting a programme, the appliance proposes automati-
cally the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you
want your laundry to be spun at a different speed. The relevant
light illuminates.
4
Rinse Hold
By pressing this button the corresponding pilot light illumi-
nates.
By selecting this function the water of the last rinse is not
emptied out to prevent the fabrics from creasing. Before
opening the door it will be necessary to empty out the water.
To empty out the water, please read the paragraph «At
the end of the programme».
16
www.zanussi.com
Summary of Contents for ZWH 7100 P
Page 1: ...EN User manual Washing Machine ZWH 7100 P ZWH 7120 P ...
Page 29: ...29 www zanussi com ...
Page 30: ...30 www zanussi com ...
Page 31: ...31 www zanussi com ...