Load the laundry
Measure out the detergent and the fabric softener
Select the required programme by means of the
programme selector dial (3)
Important!
Select the spin speed by pressing button 7
Select the available options by pressing buttons 2
Open the door by
carefully pulling the door
handle outwards. Place
the laundry in the drum,
one item at a time,
shaking them out as much
as possible. Close the
door.
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required, pour it into the
main wash compartment or in the appropriate
compartment if the selected programme/option it
requires (see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
«MAX» mark in the drawer). Close the drawer gently.
Turn the programme selector dial to the required
programme.
The selector dial can be turned either clockwise or
anticlockwise.
Turn the selector dial to position
to reset the
programme or to switch the machine off.
At the end of the programme the selector dial must be
turned to position
, to switch the machine off.
If you turn the programme selector dial to
another programme when the machine is working, the
machine will not perform the new selected
programme.
When selecting a programme, the appliance
proposes automatically a suggested spin speed for
that programme. (See «Washing programmes» for
the maximum allowed spin speed).
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant pilot light illuminates.
O
O
Daily Use
With this button you can select an additional Prewash
or an additional Rinse or both.
When this button is pressed, the corresponding pilot
light illuminates. When it is pressed again, the pilot
light goes out.
To start the selected programme, press this button.
The icon
illuminates to indicate that the appliance
starts operating and the door is locked.
If you have chosen a delayed start, the machine will
begin the countdown.
Before you start the programme, if you wish to delay
the start, press this button to select the desired delay.
The selected delay time value will appear on the
display for a few seconds, then the duration of the
programme will appear again. By pressing this button,
the washing programme can be delayed by 1 hour up
to a maximum of 24 hours.
You must select this option after you have set the
programme and before you start the programme.
You can cancel or modify the delay time at any
moment, before you press button 4.
Selecting the delay start:
1. Select the programme and the required options.
2. Select the delay start by pressing button 6.
3. Press button 4:
- the machine starts its hourly countdown.
- the programme will start after the selected delay
has expired.
Start the programme by pressing button 4
Select the Delay Start by pressing button 6
11
ZANUSSI
