
Problem
Possible solution
Make sure that the packaging and/or the transit bolts are removed. Refer to 'Instal-
lation instruction'.
Add more laundry in the drum. The load may be too small.
The appliance fills with
water and drain immedi-
ately.
Make sure that the drain hose is in the correct position. The end of the hose may
be is too low. Refer to 'Installation instruction'.
The washing results are
not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
After the check, activate the appliance. The
programme continues from the point of inter-
ruption.
If the problem occurs again, contact the Serv-
ice.
Service
We recommend the use of original spare parts.
When contacting the Service, make sure that
these data are available. You can find the infor-
mation on the rating plate: model (Mod.), PNC
(Prod.No.), Serial number (Ser.No.).
Technical information
Dimensions
Width / Height / Depth
600 / 850 / 501 mm
Total depth
519 mm
Electrical connection:
Voltage
Overall power
Fuse
Frequency
230-240 V
2100 W
13 A
50 Hz
Level of protection against ingress of solid particles and moisture en-
sured by the protective cover, except where the low voltage equipment
has no protection against moisture
IPX4
Water supply pressure
Minimum
0,5 bar (0,05 MPa)
Maximum
8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum load
Cotton
6 kg
Spin speed
Maximum
1400 rpm
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
16
www.zanussi.com
Summary of Contents for ZWG 6148K
Page 1: ...EN User manual Washing Machine ZWG 6148K ...
Page 17: ...17 www zanussi com ...
Page 18: ...18 www zanussi com ...
Page 19: ...19 www zanussi com ...