Cleaning The Drain Pump Filter
Warning!
Be careful of the hot water!
Allow detergent solution to cool down.
Unplug the machine to avoid electrical shock before washing.
Drain pump filter can filter the yarns and small foreign matters from the washing.
Clean the filter periodically to ensure the normal operation of washing machine.
Open the lower cover cap
Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
After water runs out, reset
the drain hose
Open the filter by turning
to the counter clockwise
Remove extraneous
matter
Close the lower cover cap
Caution!
Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be
inserted aligning to hole plates otherwise water may leak.
Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped. Rotate
lower cover cap directly to make water run into basin.
When the appliance is in use and depending on the programme selected there can be hot water in
the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has
finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
18
