14
Operating sequence
7. Select the Extra Rinse option
This button can be
selected with all
programmes except the
Mini 30’, Silk, Wool and
Hand wash
programmes. The
machine performs some
additional rinses.
This option is recommended for people who are
allergic to detergents, and in areas where the
water is very soft.
8. Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green pilot
light stops flashing.
The «Wash» and
«Door» lights are alight
to indicate that the
appliance starts
operating and the door
is locked.
To
interrupt
a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To
restart
the programme from the point at
which it was interrupted, press the Start/Pause
button again.
If you have chosen a delayed start, the machine
will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the Start/ Pause button flashes for 3
times.
9. Select the Delay Start
Before you start the
programme, if you wish
to delay the start, press
the Delay Start button
repeatedly, to select the
desired delay.
The relevant light illuminates.
This button makes it possible to delay the
starting of the washing programme by 3, 6,
and 9 hours.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
You can cancel the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by
pressing the Start/Pause button;
• press the Delay Start button once, the light
relevant to the selected delay goes off.
• press the Start/Pause button again to start
the programme.
IMPORTANT!
• The selected delay can be changed only
after selecting the washing programme
again.
• The door will be locked throughout the delay
time. If you need to
open the door, you must
first set the washing machine to PAUSE by
pressing the Start/Pause button and then
wait about 2 minutes untill the «Door» light
has gone off. After you have closed the door,
press the Start/Pause button again.
The Delay Start can not be selected with Drain
programmes.
126293502.qxd 20/7/07 18:18 Página 14
