background image

CAUTION!

If the temperature and level of the

water in the drum are too high, you

cannot open the door.

To open the door during the first minutes
of the cycle (or when the   operates) :

1. Touch the button 

 to pause the

appliance.

2. Wait until the indicator 

 goes off.

3. You can open the door.
4. Close the door and touch the button 

again. The programme (or the  )

continues.

At the end of the programme

• The appliance stops automatically.

• The acoustic signal operates (if it is

activated).

• In the display   comes on.
• The indicator of the button 

 goes off.

• The door lock indicator 

 goes off.

• You can open the door.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Press the button   for some seconds to

deactivate the appliance.

• Close the water tap.

• Keep the door and the detergent drawer

ajar, to prevent the mildew and odours.

The washing programme is completed,

but there is water in the drum:

• The drum turns regularly to prevent the

creases in the laundry.

• The indicator 

 flashes to remind you to

drain the water.

• The door lock indicator 

 is on. The

indicator of button 

 flashes. The door

stays locked.

• You must drain the water to open the door.
Draining the water:
1. 
To drain the water.

• Touch the button 

 . The appliance

drains the water and spins with the

maximum spin speed for selected

washing programme.

• Alternatively, touch the button   to

change the spin speed and then touch
the button 

. The appliance drains the

water and spins. If you set  , the

appliance only drains.

2. When the programme is completed and the

door lock indicator 

 goes off, you can

open the door.

3. Press the button   for some seconds to

deactivate the appliance.

The appliance drains and spins

automatically after approximately 18

hours (except for Wool programme).

AUTO-OFF option

The AUTO-OFF stand-by option automatically

deactivates the appliance to decrease the

energy consumption. All the indicators and the

display go off when :
• You do not use the appliance for 5 minutes

before you touch 

.

Press the button  to activate the appliance

again.

• After 5 minutes from the end of the washing

programme.
Press the button  to activate the appliance

again.

The display shows the end of the last set

programme.
Touch the button   if you want to set a new

cycle.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

• Some coloured items can discolour with the

first wash. We recommend that you wash

them separately for the first times.

• Button up pillowcases, close zippers, hooks

and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool

and items with painted illustrations.

12

www.zanussi.com

Summary of Contents for ZWF 71663W





















Reviews: