7 Display
The following pieces of information are shown on the
display:
•
Three blinking dashes
, when a programme is
cancelled by means of the
button.
The three blinking dashes will also appear when you
press the
button to switch the machine on, if the
previously selected cycle has been erased by means
of button.
•
Duration of washing programme
in hours
and minutes, after you have selected a
programme.
While the programme is running (after you have
pressed the
button), the displayed time value
decreases by one unit every minute.
•
The washing machine has stopped with water in
the tub
, at the end of a programme with the
or
option
: this is indicated by a
flashing zero
.
•
The washing machine has completed the
programme
: this is indicated by a
blinking zero
.
The zero will reappear when you switch the
washing machine on, unless the previous
programme has been erased by means of the
button.
Important!
The first time you use the washing machine
,
when you switch it on, it may display a blinking zero and
give an audible warning signal. This is due to the fact
that the washing machine has performed a washing
cycle during the manufacturer’s inspection tests, and
this cycle has not been erased after its completion.
•
Delay start
, a time value indicated in hours and
selected by means of the relevant button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the
button, the
countdown begins, and the delay time value
decreases by one unit every hour.
You can delay the start of the selected programme
by up to 23 hours in one hour intervals.
•
An incorrect option selection has been made
: this
is indicated by the message
Err
when a function
incompatible with the current programme is selected.
The incorrect selection is also indicated by an
audible warning signal.
•
An alarm code
indicates a fault in the machine
operation (see the relevant chapter “Something not
working?”).
82
